Add Collar Stay Slot
If you're in love with the shirt for other reasons, you could probably get a tailor to add shirt stay slots to the underside of the collar. Pick a complimentary or neutral colour and sew it all around and it wouldn't really be noticeable. If it were me, I'd either get rid of the shirt or relegate it to casual-only use. Sometimes, collar stays are also referred to as sticks, bones, knuckles, tabs or (in the UK) as collar stiffeners. Basics About the Shirt Collar Roughly speaking, there are two categories of collars: one with a glued interlining and one without. Have a question? Search for answers.
Charge the Receiver Collar
- Note: Do not allow the pet to roam inside the house with the Receiver Collar turned ON.
- A full charge takes 2-3 hours and lasts approximately 9 days
- (Built-in safety circuit prevents the Collar from overcharging)
- Fully charge the collar prior to programming a boundary
- Do not charge the Receiver Collar every night.
- Frequent charging can have a negative effect on the battery life. We recommend that the Receiver Collar be used until the Receiver Indicator Light blinks red/green or red.
To charge the Receiver Collar, lift the rubber plug to allow access to the Receiver Charge Jack . The rubber plug needs to remain attached to the Receiver Collar. Plug the Receiver Charger into the Receiver Charge Jack on the Receiver Collar. The Receiver Charge Jack and Receiver Charger are keyed to fit one way. Do not force it in backwards.
Turning the Receiver Collar ON
- Press and hold the Mode Button continuously for 2 seconds.
- The green light will light up briefly and you will hear two tones chime.
- When the Receiver Collar is turned on without a programmed boundary, the Receiver Collar will perform the ReadyTest® sequence, two chimes and then shut down.
Turning the Receiver Collar OFF
Add Collar Stay Slot Machine
But wait, there’s more! We also wanted to add some more options and value to mounts. Your stable mounts now have a new slot which is for Mount Collars. Mount Collars are new items that will grant benefits to your utility stats. They come in qualities from Common to Mythic and a mount can only wear an equal or lower quality collar.
- Press and hold the Mode Button continuously for 5 seconds.
- The red Receiver Indicator Light will be ON during this time. The red Receiver Indicator Light will then turn OFF and all Receiver Indicator Lights will stay OFF indicating that the unit is turned OFF. You will also hear a two tone chime indicating the unit has been turned OFF.
Adjusting the Static Correction Level
There are two ways to change the Static Correction Level.
With the Receiver Collar turned on, press and release the Mode Button briefly. When released, the unit will flash indicating the Correction Level by the number of times the indicator flashes. Press the mode button again within 5 seconds of the last red flash and it will increase one level. Continue to repeat this procedure until the desired static correction level is achieved.
The Static Correction Level can also be changed by connecting the BPU and navigating to the System Setting screen and selecting the Receiver Settings menu.
Add Collar Stay Slot Machines
Function and Response Table
| Indicator Light Response | Static Correction Level | Receiver Collar Function | Temperament of Pet |
| 1 Red Flash | 1 (default) | No Static Correction, Tone Only | Initial Training Mode |
| 2 Red Flashes | 2 | Low Static Correction | Timid |
| 3 Red Flashes | 3 | Medium-Low Static Correction | Timid or Average |
| 4 Red Flashes | 4 | Medium Static Correction | Average Energy |
| 5 Red Flashes | 5 | Medium-High Static Correction | Average or High Energy |
| 6 Red Flashes | 6 | High Static Correction | High Energy |
Receiver Collar Status Indicator Table
Add Collar Stay Slot No Deposit
| Status Light | Alarm Tone | Condition |
|---|---|---|
| While Plugged into Receiver Charger | ||
| Solid red | No tone | Charge in progress |
| Solid green | No tone | Charge complete |
| No light | No tone | Charge failure (possible issue with receiver, charger, or power outlet) |
| ReadyTest® | ||
| Either red or green for 3 seconds, OFF for 1 second | No tone | Unit is reporting battery status: Red = battery needs charge Green = battery charge is full |
| Red/green for 3 seconds, OFF for 1 second | No tone | Unit is performing internal self test |
| Solid green or red/green or red (5 second duration) | No tone | Battery charge indicator:Green = 100%-60% Red/green = 60%-20% Red = 20% or less |
| Red flash occuring 1 - 6 times | 2 note chime immediately after red flashing | Unit is reporting Static Correction level from 1 to 6 then shut down |
| Removing from BPU | ||
| No light | 2 note chime | Unit is shut down |
| Operating Battery Status | ||
| Slow blinking green (every 4-5 seconds) | No tone | Collar battery charge 100%-60% |
| Slow blinking red/green (every 4-5 seconds) | No tone | Collar battery charge 60%-20% |
| Slow blinking red (every 4-5 seconds) | No tone | Collar battery charge 20% or less, charge immediately |
| Receiver Activation Status | ||
| Fast pulsating green (3 flashes per second) | Low frequency warning tone | Receiver collar in Warning Zone area |
| Fast pulsating red (3 flashes per second) | Mid frequency warning tone | Anti-linger static correction being delivered with the Receiver Collar in the Warning Zone area |
| Fast pulsating red (3 flashes per second) | High frequency warning tone | Run through static correction being delivered with the Receiver Collar beyond the mapped boundary point area |